Timbuck
Well-known member
This thickness sander conveyor was was running way out of track due to a worn out support bracket bearing..I couldnt get the right replacement part an (Oilite bush 5/16" x 7/16" x 3/8" L) in the UK so I got one slightly bigger on the o/d and machined it down to fit...Instant success!" the tracking was easy peasy after that.
Here is a picture of the repair with the worn one on top of the belt....I recon it was worn out due to an over-tight belt. replacement bearing in the US here http://www.ereplacementparts.com/jet-1020-plus-628900-drum-sander-parts-c-32652_32661_32862.html
Here is a picture of the repair with the worn one on top of the belt....I recon it was worn out due to an over-tight belt. replacement bearing in the US here http://www.ereplacementparts.com/jet-1020-plus-628900-drum-sander-parts-c-32652_32661_32862.html
Last edited: