Bass'nBari project

spongeuke

Well-known member
Joined
Feb 18, 2013
Messages
743
Reaction score
290
Location
Petaluma, CA
This double necked flipping uke is both a Baritone and a Bass hence name Bass'nBari.

I arrived at the concept when I determined that I would repurpose a parlor guitar by first removing the very narrow neck. When trying to decide if I wanted a Bass or a Baritone I thought that I could set it up to take either strings. This was unpractical as the tuners where so dissimilar. Much latter I wanted to redo the bracing and thin the top from the inside so I removed the back. Then It occurred to me that I could put sound board on the back, I also determined that one thick neck would be unplayable so parallel necks were the solution.
I started over and built this one from scratch.
View attachment 105999View attachment 106000
 
Top Bottom