Electric solid body ukulele magnetic pick up
- Thread starter Goodness
- Start date
Ernie Ball Super Slinkys. Welcome to the UU.
Stagehand
Well-known member
I use Ernie Ball regular slinky 10's on my Risa TE
Easy way is the 4 thinnest from any guitar set for LINEAR tuning.
For re-entrant tuning, do the same, but replace the 4th (low-G) string with a single unwound steel string in a gauge a little thicker...
i.e., if your 'A' string is a 0.009" or 0.010", get a 0.011" or 0.012" respectively and put that as the 4th string
this is for GCEA
if you want DGBE tuning, then use the 'middle four' strings from a guitar pack and apply the same method as above for linear or re-entrant tuning....
otherwise you can search on the forum as this info with exact string gauges has been posted dozens of times before, most notably by UU brother PhilUSAFret.
For re-entrant tuning, do the same, but replace the 4th (low-G) string with a single unwound steel string in a gauge a little thicker...
i.e., if your 'A' string is a 0.009" or 0.010", get a 0.011" or 0.012" respectively and put that as the 4th string
this is for GCEA
if you want DGBE tuning, then use the 'middle four' strings from a guitar pack and apply the same method as above for linear or re-entrant tuning....
otherwise you can search on the forum as this info with exact string gauges has been posted dozens of times before, most notably by UU brother PhilUSAFret.
maki66
Well-known member
I like that, I was thinking of something very similar.
Similar threads
