Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Bridge saddle and nut day

  1. #1
    Join Date
    Mar 2009
    Location
    Stockton on Tees..North East UK.
    Posts
    4,660

    Default Bridge saddle and nut day

    Spent most of the day stocking up on spares..I'd run out of ebony saddle and nut strips..and only had a couple of bridges left .. so today I got busy making some more I ended up making 56 bridges here the are after jig drilling the string knot holes
    IMG_0610 by Ken Timms, on Flickr
    http://ukulele-innovation.tripod.com ebay i/d squarepeg_3000 Email timmsken@hotmail.com

    If you can believe that moving images and sound, can fly through empty space across the universe and be seen and heard on a box in your living room ?.. then you can believe in anything.

  2. #2
    Join Date
    Feb 2016
    Location
    Springfield, IL
    Posts
    406

    Default

    Wow, very cool !! Nice work indeed !!

  3. #3
    Join Date
    May 2010
    Location
    UK
    Posts
    1,059

    Default

    You could always try knob thorn (Senegalia nigrescens) for nut/saddles. Harder than ebony with less dampening. It's hardness is more like Lignum but without the CITES classification. The people who supply pen blank material sometimes have it. I've just tried it on a guitalele type guitar and I'm not going back to ebony or bone.
    . . . . that's a fair number of bridges!

  4. #4
    Join Date
    Oct 2014
    Location
    Little River, California
    Posts
    1,856

    Default

    I count 56. That's a lot of ukes to build. Should keep you busy at Acme Ukes Lmt.

  5. #5
    Join Date
    Mar 2009
    Location
    Stockton on Tees..North East UK.
    Posts
    4,660

    Default

    Quote Originally Posted by sequoia View Post
    I count 56. That's a lot of ukes to build. Should keep you busy at Acme Ukes Lmt.
    There was meant to be 60 but I scrapped 4 due defects in the wood ...Here's an old video of the slotting operation I used to make 3/32" thick saddles but nowadays I cut the slots for 1/16" same as the old Martin style 0. https://www.youtube.com/watch?v=cnLg_B_2Jq4
    Last edited by Timbuck; 05-06-2018 at 10:43 PM.
    http://ukulele-innovation.tripod.com ebay i/d squarepeg_3000 Email timmsken@hotmail.com

    If you can believe that moving images and sound, can fly through empty space across the universe and be seen and heard on a box in your living room ?.. then you can believe in anything.

  6. #6
    Join Date
    Apr 2011
    Location
    The Lone Star State
    Posts
    26

    Default

    Is it necessary for the saddle to pass slowly under the lathe blade? Could you chuck a drill onto where the crank is (not the human)?
    - Shaun Wright

  7. #7
    Join Date
    Mar 2009
    Location
    Stockton on Tees..North East UK.
    Posts
    4,660

    Default

    Quote Originally Posted by Bad Juju View Post
    Is it necessary for the saddle to pass slowly under the lathe blade? Could you chuck a drill onto where the crank is (not the human)?
    I could do it on my other lathe "the Southbend" it has an automatic cross feed...but I don't mind doing it by hand.
    http://ukulele-innovation.tripod.com ebay i/d squarepeg_3000 Email timmsken@hotmail.com

    If you can believe that moving images and sound, can fly through empty space across the universe and be seen and heard on a box in your living room ?.. then you can believe in anything.

  8. #8
    Join Date
    Sep 2012
    Location
    London
    Posts
    559

    Default

    Now all you have to do is make the bits that connect those two pieces!
    H

  9. #9
    Join Date
    Apr 2017
    Location
    U.K.
    Posts
    623

    Default

    Quote Originally Posted by Hms View Post
    Now all you have to do is make the bits that connect those two pieces!
    H
    I haven’t liked to ask about the other of the two parts mentioned in the thread title (it might come across badly), but I wonder where they are and how Ken makes them.

  10. #10
    Join Date
    Mar 2009
    Location
    Stockton on Tees..North East UK.
    Posts
    4,660

    Default

    Quote Originally Posted by Graham Greenbag View Post
    I haven’t liked to ask about the other of the two parts mentioned in the thread title (it might come across badly), but I wonder where they are and how Ken makes them.
    Nuts and Saddles ?
    I just make 12 inch long strips out of ebony ..1/16" x 1/4" for saddles and 3/16" x 7/32" for nuts..and i cut and shape them to length when needed .
    Last edited by Timbuck; 05-25-2018 at 04:10 AM.
    http://ukulele-innovation.tripod.com ebay i/d squarepeg_3000 Email timmsken@hotmail.com

    If you can believe that moving images and sound, can fly through empty space across the universe and be seen and heard on a box in your living room ?.. then you can believe in anything.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •