PDA

View Full Version : Gold fretbaord markers



Foxfish
01-02-2015, 08:19 AM
Hi guys, I would like to add some gold coloured 4-6mm fret board markers to my baritone uke .
The problem is I cant find any for sale... can anyone recommend a source?
Thanks Fox.

LloydAZ
01-02-2015, 08:34 AM
I'm not a luthier, so I don't know that much. I just love reading about how you guys make this magic happen.

I found Gold Pearl dots, but probably not what you are looking for.

http://www.stewmac.com/Materials_and_Supplies/Inlay_and_Pearl/Pre-cut_Inlays/Gold_Pearl_Dots.html

I wonder if you could take some standard white dots and apply gold leaf to the tops of them and seal it with a clear varnish so that it doesn't flake off.

Firetail
01-02-2015, 08:40 AM
You could try: http://orders.mopsupplies.com/

I use the 4mm gold MOP as fretboard markers and they look pretty good.

The company usually offers very prompt service.

Alan

Allen
01-02-2015, 09:28 AM
I prefer to use Gold MOP for my fret markers, but you could also try brass. Cut some from round stock in the diameter you require. But keep in mind that it will tarnish.

mzuch
01-02-2015, 09:33 AM
Go here (http://www.luthiersupply.com/dotsstrips.html)and scroll down to see gold MOP dots in various sizes.

Foxfish
01-02-2015, 10:07 AM
Thanks guys, I can see the MOP dots for sale in the UK & also some gold mother of pearl on Amazon but I really wanted "shiny" gold like the frets themselves!

Brass might work but a bit more trouble making them up... I am surprised there are so few option's available!

I was wondering about a metallic pigment in some epoxy but really, I hope to find something ready sized and available.
Perhaps a visit to a craft shop or even a jeweller (I do have a spare wedding ring)

TjW
01-02-2015, 10:41 AM
I've never worked with gold leaf, but it's available on Amazon.com.
Apparently, people wrap chocolates in small sheets of it.
Very little will be more realistically gold colored than real gold.

Michael Smith
01-02-2015, 10:51 AM
They do make a type brass that is used as a substitute for gold in jewelry applications. I think Rio Grande carries it but you would likely have to make your own dots from sheet. You might get a nice result from jewelry resin. You can get fillers of just about any color and material you can imagine.

Moore Bettah Ukuleles
01-02-2015, 11:30 AM
If you want the del thing get some gold filled sheet stock from Rio Grande jewelry supplies and cut them out yourself.

Titchtheclown
01-02-2015, 01:16 PM
Repurposing gold stud earnings might be the most readily available. A propper jeweller (not a chain jewelry store) or watchmaker might knock you out some.
Dentists and dental prosthetists are the other people who regularly work gold.
Or read up and cast some or cut some from sheet yourself.

Titchtheclown
01-02-2015, 03:54 PM
On a cheaper tack, in the cigar box guitar world screw heads (usually countersunk) are sometimes a feature on fretboards. Nice small brass or 'gold passivated' solid and plated screws can be got at all hardware stores I have been in.