For you gigging uke players, there's not much out there to cover the soundhole for feedback fighting. Heck, other than the really expensive lutehole.com, there isn't even a product for smaller guitar soundholes. Here's how I made my own custom feedback busters, even for the KoAloha "musubi" shape.
I use a half pencil and scribble over the edge:
I cut a piece of scrap spruce 1/4" smaller in diameter (this dimension will depend on the weather stripping you use).
Here's the weather stripping from Home Depot that I used:
The final installed picture, I'll probably add finish for better protection and presentation.
I use a half pencil and scribble over the edge:
I cut a piece of scrap spruce 1/4" smaller in diameter (this dimension will depend on the weather stripping you use).
Here's the weather stripping from Home Depot that I used:
The final installed picture, I'll probably add finish for better protection and presentation.