PDA

View Full Version : Picture of todays work



MichaelPfenning
02-21-2015, 04:48 PM
I glue the fret board and peg head veneer on today. I have some gaps to fill in from the binding job. or maybe ill leave it and do better next time chalk this one up to experience. If I do fill in some of the imperfections could i use CA glue with some sanding dust or will it show the the finish(tru oil). 76434764357643676437

The binding was walnut . It didn't show up as dark as I thought it would.

76455 Nut made from Corion solid surface countertop material.

sequoia
02-21-2015, 06:27 PM
I don't think those binding woes were as bad as you thought Michael from the earlier post. All that stuff can be filled including the back gaps to the sides. Believe me, nobody will notice except you... I love the shape of the body. The proportions just say "play me!". I'll bet it is gonna sound great.

lauburu
02-22-2015, 09:42 AM
It looks to me as though those gaps could be filled with CA and wood dust. The grain of the wood is quite "busy" so will help disguise any fixes. Apply the CA sparingly and make sure you sand/scrape it right back before applying the TruOil.
Miguel

MichaelPfenning
02-22-2015, 12:51 PM
Thanks once again. For the help an encouragement