PDA

View Full Version : Teton electric question about the battery



DubstepedZombie
02-24-2015, 01:12 PM
Teton arrived today, and I'm not sure how to "power it down."
Do I:

just turn the volume knob down?
disconnect any input or output cords from it?
have to take the battery out?



Dumb question but I'm lost. It came with a Duracell and I don't want to drain a nice fresh 9v.

Thanks

mattydee
02-24-2015, 01:17 PM
I don't have a Teton, but when I had an Eleuke, I just made sure it was unplugged from guitar cables. That drains the battery for sure.

DubstepedZombie
02-24-2015, 01:19 PM
That's what I was assuming, that an electrical connection was being engaged when something is plugged into it. And when you have a thick guitar cable that is 10ft or so that's a lot of metal to conduct with. Thanks, I am new to the world of electric guitar.

Ukuleleblues
02-24-2015, 01:39 PM
Most pickups/preamps are switched on and off by inserting or removing the cable from the jack. The on off switch is part of the jack, the cable makes and breaks the electrical connection. Most stompboxes are wired like this so that one of the jacks (in/out) control the power.

wildfire070
02-24-2015, 01:39 PM
Yea I just disconnect all the cables on mine. I left the battery in and it still has juice after almost a yr

kissing
02-24-2015, 04:34 PM
yep, keep it unplugged. It is the cable that switches it on.

Tootler
02-24-2015, 10:01 PM
The switch is in the socket. When you put the plug in, it pushes the contacts together, remove the plug and they spring apart and break the contact.