PDA

View Full Version : uke to pc



Esy
03-04-2008, 04:36 AM
I make cable 6.3 to 3.5 jack but now, i need but some amplifier to cable to amke voice louder and clear. some ideas ?

HypodermicMD
03-04-2008, 07:09 AM
You need an amp / preamp to go through. There isn't much cheap out there that will accomplish that.

seeso
03-04-2008, 05:07 PM
Use the M-Audio MobilePre (http://www.m-audio.com/products/en_us/MobilePreUSB-main.html).

http://img129.imageshack.us/img129/5740/mobilepreusbv2008tp8.jpg

It's great, and only $150.

NotoriousMOK
03-04-2008, 05:10 PM
Sounds like you could use an audio interface for your pc -- lots of them are reasonably inexpensive and have a preamp built in to boost your signal. I use a Presonus Firebox (ebay $200 or less, used)which works well with my laptop and connects with a firewire cable so I can monitor realtime doing multiple tracks. If you just want to get the sound there and dont need multitrack, you can get a USB interface with a preamp cheaper.

This is, of course, assuming that you are using your Pono with the factory passive pickup I've seen you mention elsewhere.

I'm pretty new so I'm sure others here with more experience in this area may have some more efficient (money-wise) ideas for you.

NotoriousMOK
03-04-2008, 05:13 PM
haha -- looks like seeso beat me to the punch -- the one he referred you to can be had on ebay for around $60-$80 used

good luck!