PDA

View Full Version : Darken Brazing Repair on Brass Reso Uke



PhilUSAFRet
05-10-2016, 03:35 AM
I recently acquired a customized Goldtone Concert resouke with what appears to a braising repair that will not darken along with the brass. I have considered Rub N' Buff Spanish copper, but am concerned about it's durability. The repair is "rougher" than the brass uke and would accept the product. The luthier that did the repair is deceased and I'm unable to determine what kind of brazing rod he likely used to determine if there is another chemical that would turn it brownish.
Anyone ever encounterd such an animal? I am great for asking questions about things that no one has encountered before.

mikeyb2
05-10-2016, 05:10 AM
I've had success darkening brass banjo bracket shoes and tension hoop with Gun Blue by Birchwood Casey.The more you apply the darker it gets, but I think they do other products which might make it darker still.(Brass Black)
91011

PhilUSAFRet
05-10-2016, 06:02 AM
Thank you so much, That reminded me that they make "Browning" for antique gun finishes. Worth a try even though I'm not sure what the brazing material is. I have some blueing, maybe a combination will be needed. Either way, if they work on the braze, better than Rub N' Buff. You can see by the picture it's a pretty rustic "aged" finish....should make it easier.

Michael Smith
05-10-2016, 07:12 AM
Go to a store that sells leaded glass supplies. They have a product for darkening copper that should work on brass.

PhilUSAFRet
05-10-2016, 02:32 PM
Thanks, I will check that out. I just wish I knew what brazing rod was used so I could be sure what would darken it without spending any money on products that may not work. Someone should know what is normally used to braze brass.

robinashby
05-10-2016, 08:51 PM
https://www.amazon.co.uk/Colouring-Bronzing-Patination-Metals-Metalworkers/dp/0500015015

this book is everything you d ever need for colouring metals,

PhilUSAFRet
05-11-2016, 01:07 AM
Now that you've piqued my old brain I remember seeing this in one of my lapidary catalogs. Thank you very much. I hope my library has one.

kkimura
05-11-2016, 01:49 AM
Judging by the grey color, I'm guessing that it's silver solder. It will darken over time but not to the same color as old brass.

PhilUSAFRet
05-11-2016, 03:55 AM
Yes, I've about concluded it is likely either silver solder or silver (56%) braising rod and am trying to find something what will get the job done. Looks like I may have to settle for more black than brown.

dave g
05-11-2016, 12:18 PM
Does kinda look like solder of some sort was used, not brazing rod. I'm wondering if you could sand it till you go right through the excess solder, just into the brass side.

PhilUSAFRet
05-11-2016, 12:53 PM
I have a confession, it actually hasn't arrived yet and I'm heading out to grandkids graduations. If it's soldered, it's probably silver solder. The luthier that did it can't tell us. Be a few weeks before I solve it. I've worked on guns, gemstones, and silver jewelry, so I'll get it sorted out somehow.