Ukador
Well-known member
Hello there !
I do not need three Ukuleles so my third Ukulele has to go.
It was made by Fidra Ukuleles in Scotland in 2014
- Solid mahogany back, sides and top
- Mahogany neck
- Ebony bridge, fretboard, headplate veneer
- Maple rosette
There are four little problems (which do not influence the sound )
1. You can feel the fret ends when you move along the side of the fretboard
2. The friction tuners are not really the most reliable ones
3. There is a small crack in the binding at one point
4. There is a small gap between the binding and the body at one point
This uke comes with a TGI hardcase, a new set of strings and a Musicnomad Humidifier
Price: SOLD
I do not need three Ukuleles so my third Ukulele has to go.
It was made by Fidra Ukuleles in Scotland in 2014
- Solid mahogany back, sides and top
- Mahogany neck
- Ebony bridge, fretboard, headplate veneer
- Maple rosette
There are four little problems (which do not influence the sound )
1. You can feel the fret ends when you move along the side of the fretboard
2. The friction tuners are not really the most reliable ones
3. There is a small crack in the binding at one point
4. There is a small gap between the binding and the body at one point
This uke comes with a TGI hardcase, a new set of strings and a Musicnomad Humidifier
Price: SOLD
Last edited: