mwaller
Well-known member
Do I need to sand / scrap away the finish under the bridge to get a strong joint, or will Titebond adhere well to a smooth lacquer finish?
If I do need to sand / scrape, do I need to take it down to bare wood, or will a light roughing of the surface be adequate? What tools should I use to avoid scratching / scuffing the rest of the soundboard?
Thanks!
Mika
If I do need to sand / scrape, do I need to take it down to bare wood, or will a light roughing of the surface be adequate? What tools should I use to avoid scratching / scuffing the rest of the soundboard?
Thanks!
Mika