PDA

View Full Version : how to build bridge



bt93
05-09-2009, 03:07 PM
hey im building my cigar box uke and have a couple questions. how do i build a bridge. (i tried taking one off of my other uke but broke it) also, do i glue the bridge in or screw it in. also,when connecting my fret board to the box, what kind of glue do i use?

deach
05-09-2009, 03:41 PM
You can buy one for $5.

bt93
05-09-2009, 03:45 PM
ya but when i went to guitar cnter (only music store near me) they had none. i want to build a cigar box like yours

deach
05-09-2009, 05:27 PM
A little more than $5 but not much more.

http://www.stewmac.com/shop/Bridges,_tailpieces/Ukulele_bridges.html

FourChordWonder
05-09-2009, 07:41 PM
I bought this one (http://cgi.ebay.com/Ukulele-ukelele-BRIDGE-Quality-beech_W0QQitemZ260343394019QQcmdZViewItemQQptZUK_M usical_Instruments_Sting_Instruments?hash=item3c9d aceee3) for ~$6 USD shipped a few weeks ago because it was the only one listed. The wood is almost white so you can stain it any color you want. There's a bunch of "vintage" style bridges listed right now that would look pretty sweet on a cigar box uke. http://shop.ebay.com/?_from=R40&_trksid=m38&_nkw=ukulele+bridge&_sacat=See-All-Categories

bt93
05-11-2009, 12:49 AM
i need to have one within one day that is why i wanted to make one. any suggestions?

deach
05-11-2009, 01:07 AM
Attach four of these to the bottom to hold the strings
http://www.biconet.com/birds/GIFs/stealth/acc/screwEye2.jpg

and use a bolt or a pencil as the bridge.

FourChordWonder
05-11-2009, 01:52 AM
Or take a small block of wood, a sharp chisel/knife/saw and just whittle away at the top to form a groove like ||_/| where the /| part acts as the saddle. Then cut a small grove on the back of the bridge so the string knots have something to grip and saw 4 slots on the rear of the top for the strings to fit. Pretty ghetto, though not as ghetto as deach's method, but it works. Just make sure you sand the bottom of the bridge to the right height for the saddle since the saddle is built into the bridge and once you glue it on you won't be able to adjust the saddle height.


Slots for strings
\/
groove for knots -->||_/|<-- saddle

Timbuck
05-11-2009, 02:31 AM
I don't know if this will be helpfull...Just click on the pic for a slide show.
http://s219.photobucket.com/albums/cc143/shiregreenbod/th_PICT2721.jpg (http://s219.photobucket.com/albums/cc143/shiregreenbod/?action=view&current=c769c9d9.pbw)

UKISOCIETY
05-11-2009, 05:16 AM
JT used half of a clothes pin for a saddle for his Spongebob uke. Exact-o knife cut 4 slots in it. 4 screws or like what Deach suggested screwed into the bottom of the body would hold the strings.

bt93
05-11-2009, 11:58 AM
thanks for all the help!