PDA

View Full Version : New spreader clamps



Timbuck
06-16-2018, 04:58 AM
I made myself a new set of these clamps to help me in fitting and sanding the linings on the radius board...They are a lot less bulky than what I've used before.
https://farm2.staticflickr.com/1824/42786928092_45dea303c5_b.jpg (https://flic.kr/p/28bWc3L)PICT0012 (https://flic.kr/p/28bWc3L) by Ken Timms (https://www.flickr.com/photos/150702140@N02/), on Flickr
https://farm5.staticflickr.com/4385/36376560036_29fb088073_b.jpg (https://flic.kr/p/XqtnXA)PICT0008 (https://flic.kr/p/XqtnXA) by Ken Timms (https://www.flickr.com/photos/150702140@N02/), on Flickr

ChuckBarnett
06-16-2018, 07:02 PM
GREAT WORK!!

But, to be expected. 😊