PDA

View Full Version : Rolling strings



Nigelapp
09-12-2018, 11:19 AM
I have just bought a Kala comfort edge Tenor. It came strung with Aquila Super Nylgut strings. I love the Ukulele, the strings not so much. One thing I have noticed is that when I bend a string, instead of it sliding across the frets, it rolls and ends up rolling under my fingers. Has anyone else had experience of that happening with these (or any other) strings? It may be poor technique on my behalf, but I haven't had this problem with any other Ukuleles I have played.

Would also love any string recommendations for a cedar topped, rosewood back and sides Tenor Uke. I like Martin strings generally, but as this is my first Tenor, and I am curious to know if anyone else has tried this combination of wood and string.

kypfer
09-12-2018, 11:32 AM
Sounds like the string is being "gripped" by the fret or the fret-board. Try to analyse which and apply an appropriate amount of friction reduction in the required area ... VERY gentle sanding and re-polishing of the wood or some metal polish on the fret-wires, but do try to keep that off the wood.

Good luck :music:

Nigelapp
09-12-2018, 11:54 AM
It happens for all strings across the whole fretboard. I think I will try swapping out the Aquila strings first, before sanding and repolishing the fretboard.

Croaky Keith
09-12-2018, 09:46 PM
Try some fluorocarbon strings - I like using Living Water low G concert strings on my tenor scale ukes. :)

Rllink
09-13-2018, 05:16 AM
Loyal Aquila Nylgut user and I've never had the strings roll as you describe it if I bend a note.