Strumaround
Well-known member
- Joined
- Jan 20, 2018
- Messages
- 81
- Reaction score
- 0
I need to replace the B (1st) & E (2nd) strings on my Baritone uke, from the Worth Brown BB63 set. However, I have run out.
I noticed that the Tenor set BT63 has a high G and C which appear to be the same gauge. And I have a spare set lying around (as I use wound strings on the Tenor).
I.E. The B from the baritone set is .74(0.0291") and the E is .62(0.0244"). This is the same as the high G and the C from the Tenor set. I.E. the G is .62(0.0244") and the C is .74(0.0291").
Am I safe to assume that these are in fact the exact same strings? Or are they going to be a different tension/hardness?
They seem to be very slightly different shades of brown, but it's hard to tell and the Worth website is not very clear.
Thanks for any help.
I noticed that the Tenor set BT63 has a high G and C which appear to be the same gauge. And I have a spare set lying around (as I use wound strings on the Tenor).
I.E. The B from the baritone set is .74(0.0291") and the E is .62(0.0244"). This is the same as the high G and the C from the Tenor set. I.E. the G is .62(0.0244") and the C is .74(0.0291").
Am I safe to assume that these are in fact the exact same strings? Or are they going to be a different tension/hardness?
They seem to be very slightly different shades of brown, but it's hard to tell and the Worth website is not very clear.
Thanks for any help.
Last edited: