PDA

View Full Version : Kamaka Friction Tuners



merlin666
04-08-2019, 06:07 AM
I bought a mid-70s Kamaka 6-string that has the original friction tuners, and got it all cleaned and set-up with fresh strings. It's fun to play and sounds awesome, but the strings lose tension and the uke goes slightly out of tune each day. After more than a month after setup I assume that the strings are well-stretched by now. Also the tuners are tightened up and already take effort to move, so I am very reluctant to tighten them any further. What else can be done to get some better tuning stability?

bobhost
04-08-2019, 06:35 AM
I gave up on friction tuners fairly early into my ukulele journey.
Gotoh UPTs make tuning an act of simplicity.

https://i.ibb.co/rwxbxYy/taro-10.jpg

Gary52
04-08-2019, 09:59 AM
Try tightening the tuners ever so slightly. It takes some tweaking to find the point where they are just tight enough to hold the string in tune.

frianm
04-08-2019, 10:26 AM
Go for the Gotoh tuners - they are amazing, easy to retrofit and a joy to use. I have them on my Opio.

Ukecaster
04-08-2019, 10:26 AM
I've had those tuners on a Kamaka. You can smooth out their operation by adding small fiber or paper washers just below the plastic buttons.

zztush
04-08-2019, 11:13 AM
Matt says that we have to tight the screw every time we tune on old Kamaka in his book.

https://i.ibb.co/mFMKGHx/1.jpg (https://imgbb.com/)