stewmac's binding with perfling attached

Matt Clara

UU VIP
UU VIP
Joined
Aug 3, 2009
Messages
1,640
Reaction score
15
Location
Lansing, Michigan
StewMac sells binding with b/w/b perfling already glued on. In the image they give as an example, there is clearly two sets of the perfling, so I'm assuming two sets of binding have been installed, one vertical and one horizontal. Is that assumption correct?
2018_2lg.jpg
 
I could be wrong but I thought this look was achieved by using the attached purfling for the strip on the side, and using a separate purfling strip for the top. It seems like it would be way too hard to match grain and mitre that edge when using two binding strips.
 
I could be wrong but I thought this look was achieved by using the attached purfling for the strip on the side, and using a separate purfling strip for the top.

Exactamundo. A step channel is routed with your binding cutter. One channel for the top, another for the sides.
 
Top Bottom