A Martin guitar question.

Hi all,

I know this is a ukulele forum, but I am hoping someone out there can help me with a small problem that has stalled me out on my Martin 000 guitar kit.

The dovetail joint is undersized on purpose so that the neck piece can be sanded into a perfect fit. Here's the problem, Martin folks say to cut a sanding block at 10 degrees, which is the bevel of the neck piece. Do you have any recommendations on now you would make a precise cut at any degree, let alone 10. They say not to bother with a miter box which I have, and I do think it needs to be pretty darned exact to make the neck fit right and be straight and level.

Any help is much appreciated.

John

I would go to kitguitars.com.. Its a kit guitar fourm and they really help with build questions.
Dan

Thanks Dan, I'll check it out.

John

Hi again all,

Looks like kitguitar.com is gone. Anybody know where it went?

Thanks,

John

It is right here.