PDA

View Full Version : Harmony tuning peg help



rmcnelly
01-13-2008, 04:29 AM
I've just obtained a well used mahogany Harmony Concert, which has very low action, and 2 of the stock tuning pegs slip when tightened. The plastic wing will slip on the shaft no matter how tight the end screw is.

I've looked at replacement friction tuners but don't know which ones to get. The stock tuners only stick up about 1/4", and the hole in the shaft is half that height. I want to make sure the replacement tuners keep the stings properly positioned.

I know I'll have to drill the shaft holes out.

Anyone else done this already and can suggest appropriate replacements?

--Rick

studentaccount1
01-13-2008, 08:39 AM
no idea. I think the folks **here** (http://www.fleamarketmusic.com/bulletin/Default.asp) are more gear-centric and would know exactly what you need.

rmcnelly
01-13-2008, 10:25 AM
Thanks, I'll try there too!