mwaller
Well-known member
Greetings!
I'm hoping some of you more experienced builders can provide some tips to improve my fret work. I've built two StewMac soprano ukulele kits. Both times, I tapped the frets in with a hammer, and leveled the frets starting with 600 grit sandpaper on a smooth, hard surface.
In the process of leveling, some frets were sanded quite a bit; others less so.
How do I install and/or level the frets in a way that avoids sanding large flat spots on some frets?
Thanks!
Mika
I'm hoping some of you more experienced builders can provide some tips to improve my fret work. I've built two StewMac soprano ukulele kits. Both times, I tapped the frets in with a hammer, and leveled the frets starting with 600 grit sandpaper on a smooth, hard surface.
In the process of leveling, some frets were sanded quite a bit; others less so.
How do I install and/or level the frets in a way that avoids sanding large flat spots on some frets?
Thanks!
Mika