Timbuck
Well-known member
Fitting kerfed linings to Sopranos can be a bit tricky sometimes..especially if the material is a bit brittle....this is how I do it nowadays.
First of all I have the correct length of the linings marked on the mould, so I can cut and bend them at the waist before fitting.
Next I mark the position of the waist bend with a felt tip marker.
Then after a short spell on the hot pipe they look like this.
Finally All glued in place ready for radius sanding
First of all I have the correct length of the linings marked on the mould, so I can cut and bend them at the waist before fitting.
Next I mark the position of the waist bend with a felt tip marker.
Then after a short spell on the hot pipe they look like this.
Finally All glued in place ready for radius sanding
Last edited: