PDA

View Full Version : MiSi Pickup in Koaloha Concert



Uncle Leroy
01-23-2011, 08:24 PM
HI,
I just ordered a MiSi pickup from MGM. I plan on having it installed in a Koaloha concert I just purchased. Does anyone have experience in this area. For instance, the width of the saddle vs the width of the pickup. I hope this is not a mod that would have to happen. I understand the heighth of the saddle must be adjusted to maintain the current action.
Also, does anybody have any other input about the MiSi that I should be aware of? As usual, thanks for all your input.

dkcrown
01-24-2011, 02:19 AM
There have been quite a few threads about installing the MiSi. I have installed two in my ukes. You need to drill two angled holes in the ends of the bridge and run the wire pickup up through one and down through the one on the other side and leave about 1/2" of end of the wire in the body of the uke. In the case of your KoAloha, this means that the width of the pickup will be almost the entire width of the saddle. KoAloha saddles tend to extend ever so slightly beyond the ends of the bridge.

Also, make sure that the excess wire is bundled tightly with a zip tie to prevent it from rattling around inside the body of the uke.

Uke Republic
01-24-2011, 05:19 AM
It's scary at first drilling into a $800 ukulele but you can do it!

dkcrown
01-24-2011, 05:58 AM
It's scary at first drilling into a $800 ukulele but you can do it!

LOL Mike, I know what you mean. I installed one in my Moore Bettah!

Moore Bettah Ukuleles
01-24-2011, 06:07 AM
These pictures might help show what dkcrown explained.

Uncle Leroy
01-24-2011, 10:16 AM
Thanks so much for the info guys. I will have a good friend of mine who is a luthier install it. He mostly works guitars but he is a pro so no worries. Chuck, thanks especially for posting the pics.