PDA

View Full Version : PEGHEDS for FLEA !



bbreeze666
02-26-2011, 10:01 PM
I don't like the orignal tuners of FLEA.
It is not easy to use !

So, I bought one set of PEGHEDS from FLEA MARKET MUSIC.

But ......

It can't install like this ~~~~
http://www.fleamarketmusic.com/store/prodimages/Pegheds-DET.jpg

The peg hole is too small ~~~

I try to buy some tools to solve this question.
But I can't find appropriate tools in stewmac.
Because their slope is not fit the PEGHEDS!

But... I don't give up !

Finally, I find this !

https://picasaweb.google.com/lh/photo/o4YM5Mbfe7EPl9WRjGComoDn7FUU6CQaBE6bJqZAtH8?feat=d irectlink

https://picasaweb.google.com/lh/photo/-sDsMPKceaabv6maRc9NXIDn7FUU6CQaBE6bJqZAtH8?feat=di rectlink

Almost fit the PEGHEDS !

Where to buy ?

A store at Taiwan.
NT. 1100.
US. 36.66

Now, my FLEA.

https://picasaweb.google.com/lh/photo/UOxcH9CrdGYl4hOuMMJLcYDn7FUU6CQaBE6bJqZAtH8?feat=d irectlink
https://picasaweb.google.com/lh/photo/MgblnhO5gelz0mKFVvBvooDn7FUU6CQaBE6bJqZAtH8?feat=d irectlink

kissing
02-26-2011, 11:38 PM
Hooray! I love pegheads! Worked really well on the Flea I used to have :)

BWright
02-27-2011, 01:13 AM
http://www.fleamarketmusic.com/store/Scripts/pageView.asp?ID=208

Have you seen the instructions at the link above?

bbreeze666
02-27-2011, 04:52 AM
http://www.fleamarketmusic.com/store/Scripts/pageView.asp?ID=208

Have you seen the instructions at the link above?

Yes.

If you just put the pegheds into the hole, the pegheds will not perfectly fit the hole.

And the "a taper to the same dimension" is difficult to find it !