PDA

View Full Version : CNC Router/Mill Plans



agilitydog
11-10-2011, 06:03 AM
Anyone familiar with these CNC plans? :http://clicks.aweber.com/y/ct/?l=MzDAF&m=JKx9iDaB21OLWX&b=i1s.4YYh6msdVoHij2ZOlg. I get these CNC info updates from Ivan Irons periodically.

Ken are you there?

Thanks for feedback

Timbuck
11-10-2011, 07:57 AM
That looks like the set up that started me off..Only I got all the info: from here http://www.hobbycnc.com/products/cnc-router-plans/
I made mine bigger at 24" X 24"X 6" I got the electronic kits there as well ..I recomend the Pro-Driver package with the bigger motors..Get the plans and build the machine first ..all you need is some good quality plywood, then order the leadscrews Rods and bearing and away you go on an adventure that will last years :D...there is a website you can log into for any help needed as well...Because I live in the UK some of the parts were too expensive for me due to inport taxes etc: so I had to improvise with parts from local suppliers.

agilitydog
11-10-2011, 08:01 AM
Thanks, Ken!