PDA

View Full Version : headstock thickness for grovers



HippieDave
12-10-2011, 02:00 PM
I can't believe I cannot find this info, but searches have come up empty. I'm going to be using Grover 9NW geared tuners, and cannot find a spec for headstock thickness (or for the hole sizes, although I can just use an index for that). Anyone have any recommendations on that?

The tuning pegs are 1/2 " from the back bracket to the beginning of the 'curve' where the hole is for the string. The peg is 13/16 overall from the back of the bracket to the tip top of the peg.

BTW, progress since initial post: a Go Bar Deck!
30864

joejeweler
12-10-2011, 02:17 PM
Not sure if those Grover tuners are built to a different spec, but the Grover uke open backed geared tuners that stewmac carries are speced out here:

http://www.stewmac.com/shop/Tuners/Ukulele_tuners/Grover_Ukulele_Tuning_Machines.html?tab=Details#de tails

Edited: This site shows the set you're talking about (Grover 9NW), and says 3/8" to 7/16" headstock thickness, and 1/4" hole:

http://www.ukuleleworld.com/TUNING-MACHINES-Post-Length-7-8-Grover-9NW-Geared-Nickel-Plated-White-Buttons.html

HippieDave
12-10-2011, 03:00 PM
Boy I feel dumb. Thanks. I never looked at the "sales" sites; I was browsing around Grover's site and looking for how to articles instead. That answer's my Q tho. thanks.

Liam Ryan
12-10-2011, 03:01 PM
I searched "Grover 9nw tuners" on Google and the very first hit had the thickness......................................?

HippieDave
12-10-2011, 04:10 PM
Well, that's because everything works backwards down there. Like water spiraling the other way etc.

Liam Ryan
12-10-2011, 08:50 PM
Here's some more google magic for you Dave:

http://www.straightdope.com/columns/read/149/do-bathtubs-drain-counterclockwise-in-the-northern-hemisphere

http://www.ems.psu.edu/~fraser/Bad/BadCoriolis.html

http://en.wikipedia.org/wiki/Coriolis_effect#Draining_in_bathtubs_and_toilets

If things are working backwards it ain't down here.

HippieDave
12-10-2011, 09:01 PM
Dang! Another treasured factoid ruined.

Allen
12-10-2011, 09:46 PM
Depending on what I'm doing I've gone from 10.5mm to 11.5mm Dave.

Don't take Liam too seriously. He'll take the piss out of anyone who's game enough to stand still while he's got them in his sights.:D

Liam Ryan
12-10-2011, 10:18 PM
Al, I thought about mentioning that I've used those tuners on most of my builds and that I like 9.5-10.5mm thickness but I didn't feel like having to show Dave how to use google to convert mm to inches.........................................

HippieDave
12-11-2011, 05:30 AM
Hey, a little humor goes a long way, but you go over the line in being insulting. f#$% off A$#@&^&.

Moore Bettah Ukuleles
12-11-2011, 05:36 AM
I can't stand the look of an anemic headstock and those posts are ridiculously short. Grover does make longer posts for them but you need to buy them separately. I get them directly from Grover. Maybe if enough people demanded the longer posts from StewMac they start carrying them.

HippieDave
12-11-2011, 05:48 AM
I agree. At 1/2 inch (or 12.7mm for those who appear to be uptight about that sort of thing), the headstock looks good. Don't much care for the idea of reducing it.