PDA

View Full Version : First Build



Geeg94
01-22-2012, 04:11 PM
Hi i am New here and have a tun of questions about finishes. i want to make my own uke and a few for friends and am starting with the Grizzle soprano kit and am going to work my way up to and kit where i get to assemble the body as well. so here is goes

1. i want to just use a basic stain can i use stain from the hardware store or do i need to use instrument stain

2. do you need a different stain for fret boards

3. is using a wood burner on the top of the uke bad for it

4. i am worried about fretting how difficult it to level them and the fret board. any tips on fretting would be great

what i am hopping to do is make a roseta with a wood burner on the top and add some on the head stock as well. Then i would like to finish the hole thing with a clear mat finish.
thanks

Geeg94
01-22-2012, 04:18 PM
Sorry i left one question out
1.if i were to use a different top then the one that comes with the kit would i be able to cut f holes in it like the Kala Arch top.
2. if i was able to use a different top with f holes how would i brace the top since the holes would get in the way of the original bracing in the kit
sorry for all the questions
Thanks again