Needle file set for nuts...4.70

Bruddah, any link? Mahalo.............................BO..........................
 
Too good to be True?

If it sounds too good to be true... it probably is. A set of feeler gauges which fold inside of their protective case can be sharpened with a small motor tool (called Dremel). The teeth do not need to be deep, just either all //////// or all\\\\\\\. It is easier and more effective to have the teeth so you pull toward the case The nice thing about them is that they cut a straight wall as they cut the depth. If you want to have teeth in both directions , do the other direction on the other side.
 
Needle files are typically pretty cheap. I paid about $5 for my 12 piece set from Harbor Freight Tools awhile back. You can also get them off amazon for about the same. So $4.70 sounds pretty standard. I also have a Nicholson 6 piece set that cost around $25 and isn't all that much better.
 
Last edited:
Top Bottom