PDA

View Full Version : Needle file set for nuts...4.70



mm stan
02-23-2012, 01:16 PM
From Micro Mark Sale...haven't tried them, but it sounds like a real deal.

808boy
02-23-2012, 01:24 PM
Bruddah, any link? Mahalo.............................BO............. .............

TheCraftedCow
02-23-2012, 07:29 PM
If it sounds too good to be true... it probably is. A set of feeler gauges which fold inside of their protective case can be sharpened with a small motor tool (called Dremel). The teeth do not need to be deep, just either all //////// or all\\\\\\\. It is easier and more effective to have the teeth so you pull toward the case The nice thing about them is that they cut a straight wall as they cut the depth. If you want to have teeth in both directions , do the other direction on the other side.

mr moonlight
02-23-2012, 07:29 PM
Needle files are typically pretty cheap. I paid about $5 for my 12 piece set from Harbor Freight Tools awhile back. You can also get them off amazon for about the same. So $4.70 sounds pretty standard. I also have a Nicholson 6 piece set that cost around $25 and isn't all that much better.

mm stan
02-23-2012, 07:53 PM
Bruddah, any link? Mahalo.............................BO............. .............

It came on my email...for a inside sale price...will email it to you...
here is another I found..http://www.harborfreight.com/catalogsearch/result?q=needle+files but this has a
shipping of $6.99
http://www.micromark.com/SearchResult.aspx?deptIdFilter=0&searchPhrase=needle+files