jazzbo
Well-known member
After listening to lots of videos, I decided to buy a Cordoba 20TM-CE. I played a couple in Guitar Center and I liked the feel, and the tone was better than anything else they had. I saw that the synthetic bridge saddle wasn't seated, because it was setting on top of the big ol' pickup wire and I knew that had to be a tone killer.
I bought it and when I got home I went straight to the shop. First, I removed the saddle, UST pickup, input jack, and all the connecting wires. After removing the battery, I screwed the EQ cover back into it's hole. I put a plastic automotive pop-rivet in the input jack hole.
I've build many saddles, but this had to be the easiest of all. I cut my bone blank to the correct length and duplicted the height of the old saddle and UST combined. I sanded it until I had a snug fit into the saddle slot, then tightened the Aquila strings and I could already hear the difference before playing it.
I'm here to tell ya, this made one heck of a difference in volume and sustain. Of course, the Uke lost some weight and that's gotta be part of it, but I'm thinking that the bone saddle seated properly in the slot is the main reason for the sonic improvement. Also, these saddles are wide enough for compensation, so I will go back to the shop after it settles in and tweak the intonation.............on the middle 2 strings.
There's lots of good Ukes out there in the $200 price range and I just wanted to share my experience with my Cordoba.
I would call the new tone mellow, like most mahogany Ukes and I'm thinking that the cutaway allows it to retain some of that small box tone that you get from a soprano and a concert size. Strumming is it's strong point and it sounds as good to me as some of the real expensive Ukes. YMMV
I bought it and when I got home I went straight to the shop. First, I removed the saddle, UST pickup, input jack, and all the connecting wires. After removing the battery, I screwed the EQ cover back into it's hole. I put a plastic automotive pop-rivet in the input jack hole.
I've build many saddles, but this had to be the easiest of all. I cut my bone blank to the correct length and duplicted the height of the old saddle and UST combined. I sanded it until I had a snug fit into the saddle slot, then tightened the Aquila strings and I could already hear the difference before playing it.
I'm here to tell ya, this made one heck of a difference in volume and sustain. Of course, the Uke lost some weight and that's gotta be part of it, but I'm thinking that the bone saddle seated properly in the slot is the main reason for the sonic improvement. Also, these saddles are wide enough for compensation, so I will go back to the shop after it settles in and tweak the intonation.............on the middle 2 strings.
There's lots of good Ukes out there in the $200 price range and I just wanted to share my experience with my Cordoba.
I would call the new tone mellow, like most mahogany Ukes and I'm thinking that the cutaway allows it to retain some of that small box tone that you get from a soprano and a concert size. Strumming is it's strong point and it sounds as good to me as some of the real expensive Ukes. YMMV