Beau Hannam Ukuleles
Well-known member
I'm wanting to make my own rope bindings and have heard there are some tricky bits
Any tips on :
1- Correct angle to cut\ the lamination for less breakage around the bouts. Also, good thickness to cut them to.
2- Epoxy for glue up.
3- Wood considerations- only aesthetical?
4- Any inside edge backing needed?
Thanks in advance.
Beau
Any tips on :
1- Correct angle to cut\ the lamination for less breakage around the bouts. Also, good thickness to cut them to.
2- Epoxy for glue up.
3- Wood considerations- only aesthetical?
4- Any inside edge backing needed?
Thanks in advance.
Beau