PDA

View Full Version : Tenor banjo/ ukulele question



NoahOathKeeper
12-19-2012, 04:58 AM
if a 19 fret tenor banjo is tuned GCDA could the D be tuned up to E and played GCEA ? using the same chords ?
(please excuse my stupidly to music theory i learned to play by ear )

mds725
12-19-2012, 06:47 AM
I don't know the science of tuning the string from D to E. It might put enough additional tension on the string to cause it to snap or enough additional tension on the neck to be a concern, or maybe not. I hope someone with more knowledge about strings answers that question for you.

If you do tune your tenor banjo to CGEA, you could use the chord shapes for an ukulele with the same tuning. You could no longer use the chord shapes meant for CGDA tuning because you'd end up playing the wrong note on the string that had been changed from D to E. For what it's worth, I bought a tenor guitar, which was developed from tenor banjos and is generally tuned CGDA, like a tenor banjo. I asked the seller to install strings for DGBE tuning (also known as "Chicago tuning" in tenor guitar circles), like a baritone ukulele and like the top four strings of a guitar, so I could use baritone ukulele chord shapes to play it.

SailingUke
12-19-2012, 07:26 AM
Most likely the string will take the additional tension of one step up to "E".
Worst case is you may need to buy a slightly thinner string to tune up to "E"

sim4lin
12-19-2012, 07:29 AM
You should be ok, use light gauge strings if it seems too tight.

EDIT - SailingUke beat me to it!

Futch
12-19-2012, 07:44 AM
Standard tenor banjo tuning is CGDA, not GCDA so you would need another string set for uke tuning.

ichadwick
12-19-2012, 10:42 AM
Or you could buy a baritone banjo uke and have the best of both worlds...