PDA

View Full Version : Nut Width Question on Tenors.



Ukejungle
05-07-2013, 07:20 AM
As a Newbie (2 months playing) I've come to notice what looks like different neck widths at the nut on Ukes seen here and youtube videos. I bought a Gretsch 9121 Tenor which has a 1 & 3/8 or 35 mm width. Is this the typical standard width for a Tenor? I seem to recall post about the Pono's nut widths being wider (maybe 1 1/2 inches) some of "K"s look wider from videos and the Uke that Aldrine plays seems closer to 1 1/2 inches. I ask because - I do wear medium gloves but would like to find a wider neck Uke to check out. Most Ukes at stores here seem to be 1 3/8.

Is there a trend for a wider nut these days?

Thanks,
Trey

kevin54
05-07-2013, 09:48 AM
From what I gather, the 1 3/8 nut width seems to be more standard. That is what's on my Pono. I do have an Islander Tenor and the nut width is 1 1/2. For me I prefer the smaller nut width just because of my hand size and for barring. Preference I suppose. I love both of my ukes though...
Regards,
Kevin

LifesShort
05-07-2013, 09:50 AM
I have a Pono tenor and a KPK tenor. I don't know what the neck widths are, but the KPK is definitely wider than the Pono. I really don't have a preference for either neck, though. The wider neck doesn't really make it any easier to play in my opinion.

molinee
07-13-2013, 03:08 PM
Well currently what size nut does Jake use??? :cool:

sim4lin
07-13-2013, 03:24 PM
I just got an Islander tenor from another UU member and was glad to find it had a 1.5 inch nut.
I can just throw my fingers at the fretboard and get the note that I want. :)

iDavid
07-13-2013, 04:04 PM
Kanile'a and Cover Bridge are 1.5. KoAloha Tenor is about 1.4. Concerts are mostly 1 3/8. I am now looking for a nice Tenor with a 1 3/8.

I find the 1 3/8 the most comfortable.

ichadwick
07-14-2013, 12:49 AM
it's 1 11/32 for a Martin T1K. I believe Kala is a little narrower. See this thread for some more:

http://www.ukuleleunderground.com/forum/showthread.php?24673-Playability

kvehe
07-14-2013, 01:27 AM
The Oscar Schmidt line has a tenor with a 1.75 inch width - the OU6W.

David Newton
07-14-2013, 09:17 AM
The question isn't "what is standard?"
The question is "what do you like?"

wendellfiddler
07-14-2013, 11:06 AM
I think having a radiused or flat fingerboard is more important the width. I do have one uke with a 1 15/16 radiused fingerboard, and it doesn't feel substantially different than the ones I have with radiused 1 3/8 boards. However, they all feel a lot different than any uke I've ever played with a flat fingerboard.

Doug

mm stan
07-14-2013, 05:32 PM
The question isn't "what is standard?"
The question is "what do you like?"

Yes Dave is Right....What is your preference and what is comfortable for you...if you are new and have shorter fingers or a beginner with with no dexterity and strength in your fingers....the 1 3/8" will be more comfortable...then you would think if you like a thin or thick neck....thin plays smoother for most.....a fast neck is the way to go... :) good luck...

iDavid
07-14-2013, 06:10 PM
Good points, I have been playing for a few year now and just recently came to the conclusion that I prefer the narrower nut. I really liked the wider nut until I started playing more barre chords. I am still not sure if I like a thicker on narrower neck.