iamesperambient
Well-known member
I know these are made where can I find them ?
any info would be helpful thanks!
any info would be helpful thanks!
Just put some on my baritone last week.
Southcoast HU or HMU both work if you want an all nylon, no steel wound option. If you want wound strings, he has two other sets. Shoot Dirk at Southcoast an email.
Light or extra light electric guitar strings should work if you have string diameters, if not, just provide scale length to any string company or other knowledgeable person to get recommendations.
Mya-Moe. Check out store -> strings & accessories
Mya-Moe. Check out store -> strings & accessories
Light or extra light electric guitar strings should work if you have string diameters, if not, just provide scale length to any string company or other knowledgeable person to get recommendations.
Don't be put off by Southcoast's terminology. Take it from me; the Southcoast Heavy Gauge strings are absolutely wonderful re-entrant baritone strings. Search my youtube channel for 'Southcoast Blues'. Then you can hear and see them on a cheap Richwood baritone ukulele. Good luck in your string search.
http://youtu.be/FMgv1jBc6Eg
If they're steel strings, they'll probably tear the bridge right off...
what are the strings made off and how do I findDon't be put off by Southcoast's terminology. Take it from me; the Southcoast Heavy Gauge strings are absolutely wonderful re-entrant baritone strings. Search my youtube channel for 'Southcoast Blues'. Then you can hear and see them on a cheap Richwood baritone ukulele. Good luck in your string search.
http://youtu.be/FMgv1jBc6Eg
It's nylon, as far as I know. All you need is the Heavy Gauge strings. They can be tuned to dgbe, which is what you see/hear in my video.what are the strings made off and how do I find
the correct strings for reentrant dgbe ? it does t
really explain what the strings are for seems
a bit over complicated to me
It's nylon, as far as I know. All you need is the Heavy Gauge strings. They can be tuned to dgbe, which is what you see/hear in my video.
i'm not going to put metal strings on my uke. (this is for my acoustic not electric)
Sorry, I was focused on that Konablaster!!!!!