BR Ukuleles
Well-known member
I was going through my stash of wood a while ago looking for some figured Blackwood for bindings. Came across some pieces a mate of mine gave me, saying he wasn't into wood with this much figure.
I had a look at the piece and decided that not only could I get a good amount of bindings, I could also squeeze out a soprano back and side set.
This is what I came up with.
Body - Australian Blackwood
Top - Engelmann Spruce
Rosette - Curly Koa and Abalone
Neck - Spanish Cedar with CF truss rod
Fret Board - Indian Rosewood
Bridge - Indian Rosewood
Bindings - Indian Rosewood
Tuners - Peg Heads
Finish - High Gloss Lacquer
I had a look at the piece and decided that not only could I get a good amount of bindings, I could also squeeze out a soprano back and side set.
This is what I came up with.
Body - Australian Blackwood
Top - Engelmann Spruce
Rosette - Curly Koa and Abalone
Neck - Spanish Cedar with CF truss rod
Fret Board - Indian Rosewood
Bridge - Indian Rosewood
Bindings - Indian Rosewood
Tuners - Peg Heads
Finish - High Gloss Lacquer