Sven
Well-known member
I decided to put some carbon fibre into a few necks but ran into a problem since I wanted the slots to taper in depth from 12 mm to zero. The method I came up with might not be for everyone (my methods rarely are) but it was simple and made me feel clever so I'll post a link to the blog post that describes it here.
http://www.argapa.blogspot.se/2014/08/installing-neck-reinforcement-rods.html
The trick was to use the tapered cf wedges as spacers under the neck blank while making the slots, thereby avoiding measuring to a large extent.
You can see a pic here if you don't want to read the post:
http://www.argapa.blogspot.se/2014/08/installing-neck-reinforcement-rods.html
The trick was to use the tapered cf wedges as spacers under the neck blank while making the slots, thereby avoiding measuring to a large extent.
You can see a pic here if you don't want to read the post: