Search results

  1. R

    Random Orbital Sanders

    I use a random orbit 5" A LOT for a wide variety of purposes. I keep mine outfitted with 220 Mirka Gold and don't switch grits. The random orbit is aggressive enough that switching grits isn't necessary in most cases. I use them hard to the point of abuse, so buying expensive RO sanders isn't...
  2. R

    Vise Is Nice

    Nice accessory jaws! Making up specialty jaws often makes a specific task much easier; here's a version I did to do the delicate work on a banjo bridge.
  3. R

    Simple uke construction idea

    I just finished up doing a "just for fun" 3 string guitar that turned out to be a hugely fun instrument. It uses a construction process that features 3mm Baltic birch ply and no bracing, and the basic methodology would convert to a great inexpensive uke design; particularly if you wanted to do...
  4. R

    String height?

    Download the full-size pdf version of my nut slotting guide from the Uke construction page of my website. The actual "ideal" measurement is based on actual setup which does not rely on a specific numerical value.
  5. R

    Concert Uke Dimensions

    I grabbed your basic drawing and imported it into CAD to produce a printable PDF of the body outline using your dimensions. This removes having to nudge the outline manually, and allows an accurate body profile to be printed out at will. The PDF is free for the using; the download link is...
  6. R

    Violin style friction tuners

    Proper fitting is the secret to smooth tuning with wood friction fit pegs. Proper peg paste smoothes use a bit, but they should work easily when newly fitted without it. The reamer is only half of the solution for fitting, as wood pegs will be ever so slightly out of round when new. They take...
  7. R

    Another band saw question

    Bought one of those, it sat around for a year or two and I moved it on. Just not much use for it if you already have a larger saw. In practice, I just used the bigger saw and never bothered using the small one. To the OP, don't purchase anything smaller than a 12". I have the 12" Delta that...
  8. R

    Nut Slot Query

    A free full size downloadable and printable Uke nut slotting guide is available at the Uke page of my website: http://www.bluestemstrings.com/pageUke1.html The download link is towards the bottom of the page.
  9. R

    Schaller GrandTune

    Looks to me like someone is a bit envious of all those Grover Sta-tite cast base tuners being sold for after-market use. Since I usually retro-fit to get rid of cast metal buttons anyhow I think I'll stay with $40 Grovers, they are a great tuner.
  10. R

    are grover tuner butto s changeable?

    Sure, I do it fairly often. The cast buttons are fairly heavy, so you get the side benefit of shaving off a lot of the excess weight. It's quite easy to remove the old button, but it takes the right tool. I used a couple pieces of scrap 1/4" bar stock to make a set of button pullers that...
  11. R

    fret slot cutting with a circular saw

    Nice job, Paul. I also use a yellow saw, just not that one. My setup works great and my entire fret slotting setup costs less than just the Stu-Mac blade.
  12. R

    Give some suggestions for a peghead logo for me.

    If you really want a single letter you can produce pretty much whatever you want from a word processing or graphics program and have it produced in pearl very economically by someone like Buddy DePaule at Luthiersupply.com as a source. I have my logos made by them, you can have custom logos cut...
  13. R

    Tell me about the jeweler's saw you use

    I made mine from a heavy duty hacksaw frame after hurling the X-acto type as far away from my work area as possible. It's very solid and is fitted with two blocks made from 3/8" key stock. It has two allen head screws that tighten against the blade blocks to retain the blade. One of these days...
  14. R

    Fretboard binding question

    I personally have a dislike for bound boards, so offer up the option to you of undercutting the tang end and filling the voids created by the fret slots. A clean fret board with no obvious binding and no fret ends or slots visible is my preference.
  15. R

    Luthier's Friend Sanding Station

    Here's a variation of the spindle sander jig that is seen a lot. Here it is set up for doing the heel cut on a banjo neck but you can set it up to do a much larger radius cut to match your uke body if you're using a contoured upper body shape.
  16. R

    Bluestem Uke Building tips page

    Added a bunch of finish shots in anyone is interested. I'll be adding a YouTube demo in the near future, too. This one turned out really nicely with a lovely tone.
  17. R

    Spool Clamp for ya...

    I'll link the YouTube video for a new spool clamp design that I'm using. It's a quick 1-1/2 minute overview, and I know the design isn't original, but I haven't seen these made with a coupling nut before. Here's the link... http://youtu.be/563LoJKD_b0
  18. R

    Bluestem Uke Building tips page

    Hi All, Added a few new shots and a bit more verbage to my "Uke building tips" page here: http://www.bluestemstrings.com/pageUke1.html
  19. R

    Another curvy end wedge...

    Here's another curvy end wedge I just added to my Uke info web page. I know it's nothing new, but it was kinda fun...
  20. R

    Radius Dish Form Guide now available!

    Hi All, I've added a Radius Dish Pattern Guide to my website for anyone who might be interested. The guide consists of three pdfs that are assembled into a 30" full size guide that has multiple radii ranging from 12-1/2' to 30' and for any dish diameter up to 30". I did these after watching a...