best tuning pegs for a kamaka concert?

thesillydave

Active member
Joined
Jul 24, 2010
Messages
1,494
Points
36
i love my kamaka, but hate the old style tuning pegs. but i don't really want to drill out the holes for something new...any ideas? thanks!
 

DownUpDave

UU VIP
UU VIP
Joined
Mar 15, 2014
Messages
6,425
Points
83
Definitely the Gotoh UPT tuners that the new Kamakas come with. I have them on a few different ukes including a Kamaka and they are my favorite tuners period.
 

JJFN

Well-known member
Joined
Feb 18, 2014
Messages
1,135
Points
48
Definitely the Gotoh UPT tuners that the new Kamakas come with. I have them on a few different ukes including a Kamaka and they are my favorite tuners period.

2nd They are great on my Koaloha Concert.
 

UkeStuff

Well-known member
Joined
Feb 15, 2016
Messages
2,614
Points
63
Replacing tuners shouldn't be a major project. You can buy a tapered wood reamer (mine was less than $4 on eBay), ream to the right dimension (both ways) and install Gotoh UPTs. The hardest choice is choosing the button type. Best prices seem to be direct from the Ukulele Site, although there are some on eBay for $72-$75 shipped.

Just remember...your tuners will be worth more than many ukuleles!
 

Rakelele

Well-known member
Joined
Jun 22, 2014
Messages
2,078
Points
63
Another vote for Gotoh UPT. My 2012 Kamaka soprano came with them from the factory, and they work very well. However, I think they are slightly wider than the original tuners, so as suggested above, you might have to do a bit of reaming. I'm not talented in such things and would be worried about splitting the finish etc. so instead, I'd look for someone to install them professionally.
 

strumsilly

Active member
Joined
May 23, 2010
Messages
3,959
Points
38
yep, UPT. replaced the fiddly tuners on my vintage Martin tenor with them. [much to the horror of vintage purists] Had to ream the holes[slightly] . I used a step drill bit and did it slowly by hand.
 
Last edited:

frianm

UU VIP
UU VIP
Joined
Jul 15, 2015
Messages
351
Points
18
I put the upt tuners on my Kamaka - a beat up gold label. To make the install look right I had to peg the original tuner holes as they were very close to the edge of the headstock - I then re-drilled and reamed the headstock in the correct place so as to keep the body of the ups tuners inside the edges of the headstock. I am well pleased. I am told that the new Kamakas use the matte chrome and white/cream buttons.

I did consider pegheds but have used the Gotoh upt on three different instruments and like them enormously. I am considering putting them on my OXK - cash flow permitting!