sequoia

Though neither the OP nor any other luthier seeks nor needs my amateur input, it may be helpful for other folk viewing this thread to...

Here's how my first try turned out, I'm looking forward to hearing it!

Mine are 15-1/2" x 7/32" x 3/8" for 1 strip. Will need 2. Works well on tenors.

4,534 miles to be exact.

I made the spring loaded bars long so that they go against the ceiling. No go-bar deck at all to store, and any place on the bench can...

Had a request to purchase the Blackwood with Torrified Sitka so here they are with bodies before I applied pore filler.

Are you referring to this Liam? https://classicguitar.com/liam-romanillos-england/

Yes - that was it. Widen the top of the slot just a bit. I;m using a triangular needle file to sort of press it open, not really...

Yes, I forgot to add to my advice that I always take an old worn small screwdriver and use it to widen the slots a bit. Nothing radical...

I know exactly what you are talking about. I also use a drill press and fret cauls. What I do to prevent the flopping over is to ever so...

Now in the shop window :)

Traditional on budget (cheap) ukuleles. It is a fine joint until... it isn't. Modern aliphatic adhesives probably give more strength to...

The latest set, three siblings: Concert - Florida rosewood (Dalbergia sissoo), aromatic cedar top (Juniperus virginiana)...

Got three sop's going, and decided to record top measurements. Here's pix of each top with weight and thickness. (Not that these...

Not to be a Pollyanna about it, but I've always had excellent service from StewMac. Replacing tools no questions asked.