1bad914
Reaction score
56

Latest activity Postings About

    • 1bad914
      1bad914 replied to the thread Kerfing size.
      That is exactly what I did for the first two baritone ukes. Just used some from my guitar supply that were already made. I cut them...
      • IMG_5040.jpeg
    • 1bad914
      1bad914 reacted to Orra's post in the thread Kerfing size with Like Like.
      My current batch is about 15mm x 5mm These were made with guitars in mind, I have used them on ukes and just trimmed the height down on...
    • 1bad914
      I have multiple drawings, but none of them give good measurements on kerfing size. I have built many full sized acoustic guitars, but I...
    • 1bad914
      1bad914 replied to the thread New to the forum.
      I tried to find a picture of the original board. It was 4/4 walnut, not end grain. I will hunt for the picture. I resawed it.
    • 1bad914
      1bad914 replied to the thread New to the forum.
      Thank you. It glued up well and made it through the drum sander. It appears to not be end grain, but only time will tell if it stays...
      • IMG_4709.jpeg
    • 1bad914
      1bad914 replied to the thread 2 Baritone Ukulele build.
      As in guitar building, you want to take the instrument right to the edge of the build cliff. I will take any advice I can get.
    • 1bad914
      1bad914 replied to the thread Luthiers Mercantile.
      Sad to see it go.
    • 1bad914
      1bad914 replied to the thread 2 Baritone Ukulele build.
      Thank you for the advice. As of right now my sides are between.070-.080, the tops and backs are between.080-.090. I have not done any...
    • 1bad914
      1bad914 replied to the thread 2 Baritone Ukulele build.
      One of the things I like to do when building an instrument is to use locally sourced woods. All of the back and side wood used is from...
    • 1bad914
      First a little bit about me. I am a retired IT Director that started building guitars about 6 years ago. I build mainly acoustic...
      • IMG_4668.jpeg
      • IMG_4298.jpeg
      • IMG_3248.jpeg
      • IMG_3249.jpeg
      • IMG_2261.jpeg
    • 1bad914
      1bad914 replied to the thread New to the forum.
      I usually build two instruments at once, so I will do a build thread featuring two baritone ukes. A walnut back and side and a curly...
    • 1bad914
      1bad914 reacted to bbkobabe's post in the thread New to the forum with Like Like.
      There is also a guitar section here if you want that... scroll down on the main menu...
  • Loading…
  • Loading…
Top Bottom