Results 1 to 4 of 4

Thread: Picture of todays work

  1. #1
    Join Date
    Aug 2014
    Location
    Southern Minnesota
    Posts
    51

    Default Picture of todays work

    I glue the fret board and peg head veneer on today. I have some gaps to fill in from the binding job. or maybe ill leave it and do better next time chalk this one up to experience. If I do fill in some of the imperfections could i use CA glue with some sanding dust or will it show the the finish(tru oil). IMG_0639.jpgIMG_0642.jpgIMG_0645.jpgIMG_0647.jpg

    The binding was walnut . It didn't show up as dark as I thought it would.

    IMG_0650.jpg Nut made from Corion solid surface countertop material.
    Last edited by MichaelPfenning; 02-21-2015 at 05:25 PM.

  2. #2
    Join Date
    Oct 2014
    Location
    Little River, California
    Posts
    1,982

    Default

    I don't think those binding woes were as bad as you thought Michael from the earlier post. All that stuff can be filled including the back gaps to the sides. Believe me, nobody will notice except you... I love the shape of the body. The proportions just say "play me!". I'll bet it is gonna sound great.

  3. #3
    Join Date
    Jul 2012
    Location
    Auckland NZ
    Posts
    356

    Default

    It looks to me as though those gaps could be filled with CA and wood dust. The grain of the wood is quite "busy" so will help disguise any fixes. Apply the CA sparingly and make sure you sand/scrape it right back before applying the TruOil.
    Miguel

  4. #4
    Join Date
    Aug 2014
    Location
    Southern Minnesota
    Posts
    51

    Default

    Thanks once again. For the help an encouragement

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •