Results 1 to 5 of 5

Thread: uke to pc

  1. #1
    Join Date
    Feb 2008
    Posts
    293

    Default uke to pc

    I make cable 6.3 to 3.5 jack but now, i need but some amplifier to cable to amke voice louder and clear. some ideas ?

  2. #2
    Join Date
    Feb 2008
    Posts
    22

    Default

    You need an amp / preamp to go through. There isn't much cheap out there that will accomplish that.

  3. #3
    Join Date
    Dec 2007
    Location
    Chicago
    Posts
    11,334

    Default

    Use the M-Audio MobilePre.



    It's great, and only $150.

  4. #4
    Join Date
    Mar 2008
    Location
    San Juan Capistrano, CA
    Posts
    643

    Default

    Sounds like you could use an audio interface for your pc -- lots of them are reasonably inexpensive and have a preamp built in to boost your signal. I use a Presonus Firebox (ebay $200 or less, used)which works well with my laptop and connects with a firewire cable so I can monitor realtime doing multiple tracks. If you just want to get the sound there and dont need multitrack, you can get a USB interface with a preamp cheaper.

    This is, of course, assuming that you are using your Pono with the factory passive pickup I've seen you mention elsewhere.

    I'm pretty new so I'm sure others here with more experience in this area may have some more efficient (money-wise) ideas for you.

  5. #5
    Join Date
    Mar 2008
    Location
    San Juan Capistrano, CA
    Posts
    643

    Default

    haha -- looks like seeso beat me to the punch -- the one he referred you to can be had on ebay for around $60-$80 used

    good luck!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •