Hey folks,
I was not sure if this should go in 'Uke Tech Support' section or 'Luthier's Lounge' section, so to err on the side of caution, I'm putting this in the 'Uke Tech Support' section. If the moderators think this information is better placed elsewhere, please feel free to move the thread. It's all good with me.
So, what is this all about? Well, please, fellow ukulele lover, allow me to share the results of some of my efforts with you...
Over the past few years I've mentioned a few times that as part of my instrument hacking modifications, I've installed different tuners to my Flea ukuleles since I just can't make it work with ANY friction tuners.
I know many folks love them, and I am not knocking friction tuners, if they work for YOU and you are happy with them, then more power to you.
But they are not for me. After trying a dozen different sets from all different brands, priced from $15 all the way up to $99, and I just cant do it. For my use of the instrument, there's just too much frustration in trying to find the sweet spot with the screw tension vs. the constant over-tuning and then under-tuning of the 1:1 ratio when compared to my use of geared tuners, either like 'guitar tuners' or the planetary tuners such as the PedHeds or Gotoh UPTs. Maybe I've been spoiled by geared tuners with a 12:1 or 18:1 ration on guitars for 35+ years, but I am tired of trying to use friction tuners. Please understand, if they work for YOU, then go for it. YMMV.
Either they've failed me, or I've failed to persist through the pain until i can appreciate them. It's my problem, that I'd like to share with you how I solved it.
Since I have many ukes I cannot affort to put the Gotoh or PegHeds on all of them, so I've ended up with, and am QUITE HAPPY with less expensive geared tuners. If money were no object, I'd probably use the Gotoh UPT-L tuners on all my ukes, partly due to how smooth they work, and partly due to the simple and easy installation.
Fear not, if you've read this far you will be rewarded by seeing everything I'm saying here in the photos below...
I've said many times on the forum how much I enjoy my Fluke and Flea ukuleles, with their near-perfect intonation and easy playability, comfort and very sweet sound, so I won't bore you with further details. All I will say here is please do not discount them until you have had hands-on experience with one. They are not for everybody, as we all have subjective preferences.
The first instrument made by Magic Fluke Company that I got was a concert Lava Flea. I bought this instrument on sale from Mike at Uke Republic back in October of 2013.
My concert Lava Flea has the Gotoh UPT-L planetary geared tuners. The only thing required for their installation was to enlarge the tuner holes. Since I don't have peg reamer, and I dont mind making my own tools as needed, I used a UniBit (aka step-bit) which I have rigged to a T-handle with a hex shaft. once the hole was enlarged to about 8mm, the UPT-L tuners went in easy and all that was required was to use a 10mm hex spanner to tighten down the nut on the bushing. Easy-peasy.
My concert Lava Flea has Martin M600 strings installed and is tuned to re-entrant GCEA. Photos are below:
Lava Flea
The second Magic Fluke Company instrument that I got was a Koa tenor Fluke with the rosewood fretboard and PegHed tuners upgrades already installed. I purchased this instrument used here in the Marketplace from a fellow UU member back in February of 2014, and it was a painless and easy transaction. I found the PegHed tuners to work fine, but if I were to be splitting hairs, the Gotoh UPT-L tuners are touch smoother to me. Having said all that, there was nothing for me to do with this instrument, but I am including it here for visual reference and comparison.
My tenor Koa Fluke has Martin M620 strings and is tuned re-entrant E-A-C#-F#. Photos are below:
Koa Fluke
The third Magic Fluke Company instrument that I got was the Walnut with Birch rosette tenor Flea, that came with the rosewood fretboard upgrade but had the stock Grover 2B friction tuners. I bought this instrument used from Elderly Instruments in January of 2015, and it came flawless, and almost looked mint when I got it.
The Walnut Flea has a set of modified acoustic guitar tuners. By modified, I used the 20mm shafts from a set of tuners from pinpegpickups.com, since the original shafts were each 25mm long, and TOO LONG for use in the headstock of the Flea, where the tuner shafts are oriented 180 degrees apart (see photos) . Not all geared tuners have interchangeable parts as some have a different polygon shape milled inside the actual brass gear than the typical hexagon. Also, I wanted white or cream tuner buttons for this uke and Grover does not make them and the 4 other different tuner sets that I tried did not work out well. One caution is that most bushings that come with guitar tuners as well as those that come with the Grover 9NB tuners have an outer diameter of 11mm, and unless you want to enlarge the tuner hole, they will NOT fit. If you try to force them into the existing 6.5mm hole you will likely split the headstock (Don't ask me how I know /sadface/)
Also, if you go this route, MANY geared tuners have their mounting holes in the corners of the metal plate (such as all the geared ukulele tuners sold by CB Gitty), and as such will likely split the headstock wood (once you install the 4/40 screws, and yes EVEN if you pre-drill pilot holes) since they are so close to the edge.
So you need to use geared tuners such as the Grover 9NB set that has the plate mounting screws in the MIDDLE of the plate, and then you will have no problems.
My tenor Walnut Flea currently has Aquila LAVA strings and is tuned re-entrant GCEA. Photos are below:
Walnut Flea
Finally, the fourth Magic Fluke Company instrument that I got was a 'Hibiscus' (pinkish colored) tenor Flea with the plastic fretboard and also came with the stock Grover 2B friction tuners. I bought this instrument new from Gryphon Strings in Palo Alto, CA in April of 2015. Also a flawless transaction.
For the Hibiscus Flea, I went with a modified set of the $15 Grover 9NB geared tuners. I trimmed down the shape and size of the plate on the tuners with a dremel since the way these tuners ship, the metal plate is a bit larger than the thickness of the Flea headstock.
My tenor Hibiscus Flea has Worth Browns (BT) tenor strings and is tuned re-entrant F-Bb-D-G. Photos are below:
Hibiscus Flea
I will include in a separate post below, a photo of the UniBit/T-handle tool I made for enlarging the holes for the UPT-L tuners since there is a four picture limit per post.
So, for the many folks that have requested I provide some more information when I've mentioned these tuner installs in previous posts, hopefully this will begin to clarify things.
In anticipation of some potential frequently asked questions...
Q: Am I happy with the tuners that I installed?
A: Absolutely. Now I don’t even think about the tuners any more.
Q: Was it worth the time and effort?
A: Yes. I also learned a few things along the way.
Q: Why not just have a Luthier do this and not bother?
A: If I can do it myself, then I will not ever pay someone else to do things for me, unless, and if an exception, I simply do not have the time.
Q: Why not just buy these instruments with the 'proper' or PegHed tuners already installed?
A:
If you have any questions or comments, please let me know here in this thread (as opposed to PM) so that the information remains public and can benefit everyone who might be interested in this information.
Mahalo,
Booli
I was not sure if this should go in 'Uke Tech Support' section or 'Luthier's Lounge' section, so to err on the side of caution, I'm putting this in the 'Uke Tech Support' section. If the moderators think this information is better placed elsewhere, please feel free to move the thread. It's all good with me.
So, what is this all about? Well, please, fellow ukulele lover, allow me to share the results of some of my efforts with you...
Over the past few years I've mentioned a few times that as part of my instrument hacking modifications, I've installed different tuners to my Flea ukuleles since I just can't make it work with ANY friction tuners.
I know many folks love them, and I am not knocking friction tuners, if they work for YOU and you are happy with them, then more power to you.
But they are not for me. After trying a dozen different sets from all different brands, priced from $15 all the way up to $99, and I just cant do it. For my use of the instrument, there's just too much frustration in trying to find the sweet spot with the screw tension vs. the constant over-tuning and then under-tuning of the 1:1 ratio when compared to my use of geared tuners, either like 'guitar tuners' or the planetary tuners such as the PedHeds or Gotoh UPTs. Maybe I've been spoiled by geared tuners with a 12:1 or 18:1 ration on guitars for 35+ years, but I am tired of trying to use friction tuners. Please understand, if they work for YOU, then go for it. YMMV.
Either they've failed me, or I've failed to persist through the pain until i can appreciate them. It's my problem, that I'd like to share with you how I solved it.
Since I have many ukes I cannot affort to put the Gotoh or PegHeds on all of them, so I've ended up with, and am QUITE HAPPY with less expensive geared tuners. If money were no object, I'd probably use the Gotoh UPT-L tuners on all my ukes, partly due to how smooth they work, and partly due to the simple and easy installation.
Fear not, if you've read this far you will be rewarded by seeing everything I'm saying here in the photos below...
I've said many times on the forum how much I enjoy my Fluke and Flea ukuleles, with their near-perfect intonation and easy playability, comfort and very sweet sound, so I won't bore you with further details. All I will say here is please do not discount them until you have had hands-on experience with one. They are not for everybody, as we all have subjective preferences.
The first instrument made by Magic Fluke Company that I got was a concert Lava Flea. I bought this instrument on sale from Mike at Uke Republic back in October of 2013.
My concert Lava Flea has the Gotoh UPT-L planetary geared tuners. The only thing required for their installation was to enlarge the tuner holes. Since I don't have peg reamer, and I dont mind making my own tools as needed, I used a UniBit (aka step-bit) which I have rigged to a T-handle with a hex shaft. once the hole was enlarged to about 8mm, the UPT-L tuners went in easy and all that was required was to use a 10mm hex spanner to tighten down the nut on the bushing. Easy-peasy.
My concert Lava Flea has Martin M600 strings installed and is tuned to re-entrant GCEA. Photos are below:
Lava Flea
The second Magic Fluke Company instrument that I got was a Koa tenor Fluke with the rosewood fretboard and PegHed tuners upgrades already installed. I purchased this instrument used here in the Marketplace from a fellow UU member back in February of 2014, and it was a painless and easy transaction. I found the PegHed tuners to work fine, but if I were to be splitting hairs, the Gotoh UPT-L tuners are touch smoother to me. Having said all that, there was nothing for me to do with this instrument, but I am including it here for visual reference and comparison.
My tenor Koa Fluke has Martin M620 strings and is tuned re-entrant E-A-C#-F#. Photos are below:
Koa Fluke
The third Magic Fluke Company instrument that I got was the Walnut with Birch rosette tenor Flea, that came with the rosewood fretboard upgrade but had the stock Grover 2B friction tuners. I bought this instrument used from Elderly Instruments in January of 2015, and it came flawless, and almost looked mint when I got it.
The Walnut Flea has a set of modified acoustic guitar tuners. By modified, I used the 20mm shafts from a set of tuners from pinpegpickups.com, since the original shafts were each 25mm long, and TOO LONG for use in the headstock of the Flea, where the tuner shafts are oriented 180 degrees apart (see photos) . Not all geared tuners have interchangeable parts as some have a different polygon shape milled inside the actual brass gear than the typical hexagon. Also, I wanted white or cream tuner buttons for this uke and Grover does not make them and the 4 other different tuner sets that I tried did not work out well. One caution is that most bushings that come with guitar tuners as well as those that come with the Grover 9NB tuners have an outer diameter of 11mm, and unless you want to enlarge the tuner hole, they will NOT fit. If you try to force them into the existing 6.5mm hole you will likely split the headstock (Don't ask me how I know /sadface/)
Also, if you go this route, MANY geared tuners have their mounting holes in the corners of the metal plate (such as all the geared ukulele tuners sold by CB Gitty), and as such will likely split the headstock wood (once you install the 4/40 screws, and yes EVEN if you pre-drill pilot holes) since they are so close to the edge.
So you need to use geared tuners such as the Grover 9NB set that has the plate mounting screws in the MIDDLE of the plate, and then you will have no problems.
My tenor Walnut Flea currently has Aquila LAVA strings and is tuned re-entrant GCEA. Photos are below:
Walnut Flea
Finally, the fourth Magic Fluke Company instrument that I got was a 'Hibiscus' (pinkish colored) tenor Flea with the plastic fretboard and also came with the stock Grover 2B friction tuners. I bought this instrument new from Gryphon Strings in Palo Alto, CA in April of 2015. Also a flawless transaction.
For the Hibiscus Flea, I went with a modified set of the $15 Grover 9NB geared tuners. I trimmed down the shape and size of the plate on the tuners with a dremel since the way these tuners ship, the metal plate is a bit larger than the thickness of the Flea headstock.
My tenor Hibiscus Flea has Worth Browns (BT) tenor strings and is tuned re-entrant F-Bb-D-G. Photos are below:
Hibiscus Flea
I will include in a separate post below, a photo of the UniBit/T-handle tool I made for enlarging the holes for the UPT-L tuners since there is a four picture limit per post.
So, for the many folks that have requested I provide some more information when I've mentioned these tuner installs in previous posts, hopefully this will begin to clarify things.
In anticipation of some potential frequently asked questions...
Q: Am I happy with the tuners that I installed?
A: Absolutely. Now I don’t even think about the tuners any more.
Q: Was it worth the time and effort?
A: Yes. I also learned a few things along the way.
Q: Why not just have a Luthier do this and not bother?
A: If I can do it myself, then I will not ever pay someone else to do things for me, unless, and if an exception, I simply do not have the time.
Q: Why not just buy these instruments with the 'proper' or PegHed tuners already installed?
A:
1) You can ONLY get PegHeds factory installed if you select them at time of purchase, OR are willing to pay shipping BOTH WAYS to Magic Fluke Company for them to install them after the fact, or if you purchased from another vendor.
2) Two of these instruments were USED and did not offer the option.
3) I am a DIY (do IT yourself) person, and I wanted the experience and the learning that came along with working towards the end result, with nobody to blame but myself if something when wrong, and if it did go wrong, I enjoy the troubleshooting and thought process of trying to figure things out for myself.
2) Two of these instruments were USED and did not offer the option.
3) I am a DIY (do IT yourself) person, and I wanted the experience and the learning that came along with working towards the end result, with nobody to blame but myself if something when wrong, and if it did go wrong, I enjoy the troubleshooting and thought process of trying to figure things out for myself.
If you have any questions or comments, please let me know here in this thread (as opposed to PM) so that the information remains public and can benefit everyone who might be interested in this information.
Mahalo,
Booli
Last edited: