Results 1 to 2 of 2

Thread: resawing question

  1. #1
    Join Date
    Sep 2014
    Location
    Madison, WI
    Posts
    128

    Default resawing question

    Wondering what your preference is on this-

    I resaw on a 18" Rikon with a 3TPI 3/4" blade. Normally I tension the blade to the normal level (according to the saw) for that blade size.

    Recently I have been reading some discussion on resawing where people advocate either higher tension to increase beam strength of the blade and keep it cutting straight, or less tension so the saw doesn't have to work as hard to spin the blade and thus you get more HP for the cut.

    do you have a preference? have you tried both? I would hesitate to use less than normal tension because Id worry that the blade would drift, maybe that's not the case.

  2. #2
    Join Date
    Mar 2011
    Location
    Hawaii and Alaska
    Posts
    37

    Default

    There seems to be a lot of misinformation on how to set up a bandsaw for resawing. I found this video awhile back and found it to be the best information I have ever found on this subject. If you follow the steps outlined you will never have any problems resawing again.
    https://www.youtube.com/watch?v=wGbZqWac0jU

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •