Brace gluing help

It is not difficult to remove the back in this case to make the repairs. It is probably the best way for the best repair. The problems comes into play when you have to consider the finish repair that goes along with removal. If its got bindings, more trouble. If its an older uke, refinishing is much easier. The newer ukes that are imports are almost always a plastic type of finish and they are not repairable IMO.

If you can get glue into the repair area and are sure the glue will hold, no problem. Don't expect a good looking repair job though, it gets sloppy in there fast. Good luck.
 
Top Bottom