Results 1 to 7 of 7

Thread: bending Bloodwood binding

  1. #1
    Join Date
    Mar 2011
    Location
    Winnipeg, Canada
    Posts
    41

    Default bending Bloodwood binding

    Greetings:
    I have been following the form for a while now and have finally jumped in with my first build. I have Bloodwood accents in my build, a strip down the center of the neck, and want to use Blood wood for binding.
    I soaked the 1/16th strips for about 1 hour and tried them on my light-bulb bending forum and it broke. I tried a heated pipe with the same results, broken strips.
    I was looking at a thread for side sound port and it had a photo of a sound port with a blood wood strip around the port. So somebody has the skill to bend this wood to a degree far exceeding binding curves.

    Could anybody be so kind to offer some insight into how to bend Bloodwood for binding. I have bent flamed maple sides for this instrument and heat and slow going worked but I am stumped with this binding.
    Cheers Ron.

  2. #2
    Join Date
    Feb 2014
    Location
    Cumbria, NW England
    Posts
    461

    Default

    We had this question recently: heres the link

    http://forum.ukuleleunderground.com/...d-Wood-Binding

  3. #3
    Join Date
    May 2010
    Location
    Cairns, Australia
    Posts
    2,275

    Default

    I have bent a aweful lot of bindings. Some easy, some difficult, and then there's Bloodwood that I can not bend at all. Every single piece snaps like it's made of glass. I had to find another timber that was complimentary to the builds that I was usuing them on. For me that was Jarrah. Fortunately easy to source in Australia.

    The stack of Bloodwood bindings are now set aside for inlay into boxes.

  4. #4

    Default

    I haven't bent bloodwood bindings but I have bent bloodwood guitar sides in a Fox style bender without issue. You might try Super-Soft 2 veneer softener. Might be time to upgrade to a heating blanket rather than a light bulb. What are you using to heat your pipe bender? For stubborn woods I sometimes put a wet cloth on the pipe and bend the wood over that. It's good to hold some aluminum backing support while you're bending. Make some strips with wooden handles.

  5. #5

    Default

    If I am going to bend really stuborn and or valuable old woods I soak the wood in supersoft 2 (wrapped in tin foil) overnight Then put it in a Pandora's Box for 20 minutes then on to the bending blanket. Pandora's Box is a steam box powered by one of those little steam generators you often see sold on tv. Small steam generators are pretty easy to find at thrift stores
    Michael Smith
    Goat Rock Ukulele
    www.goatrockukulele.com

  6. #6
    Join Date
    Oct 2014
    Location
    Little River, California
    Posts
    1,987

    Default

    I perfectly solved my bloodwood bending problems with a simple idea: I don't try to bend the stuff anymore and you know what? I haven't had a single failure since. 100% success! I'm also having 100% success bending ebony bindings by not trying to bend ebony anymore.

    One wood I really like to bend is Koa. So polite. So supple. A pleasure to bend. Looks better too.

  7. #7
    Join Date
    Mar 2009
    Location
    Stockton on Tees..North East UK.
    Posts
    4,849

    Default

    Quote Originally Posted by sequoia View Post
    One wood I really like to bend is Koa. So polite. So supple. A pleasure to bend. Looks better too.
    Thats why it's used so much.....I was amazed the first time I bent some Koa, after years of fighting mahogany...Same with Maple drum shells One of the most common used materials in percussion...(Now! Chuck comes in, on about curley Koa and how hard that is to bend )
    Last edited by Timbuck; 09-30-2017 at 08:58 PM.
    http://ukulele-innovation.tripod.com ebay i/d squarepeg_3000 Email timmsken@hotmail.com

    If you can believe that moving images and sound, can fly through empty space across the universe and be seen and heard on a box in your living room ?.. then you can believe in anything.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •