Results 1 to 5 of 5

Thread: Fishman built-in tuner/equalizer

  1. #1

    Default Fishman built-in tuner/equalizer

    Hi all...
    I apologize in advance if this is a question that has been asked before, but does a Fishman built-in tuner/equalizer need to be plugged into an amp before the tuner will operate? I have a Lanikai SOT-6EK and while the tuner will tune if I hold the power button down, once I release the button it turns off.
    Thanks!

  2. #2
    Join Date
    Apr 2018
    Location
    Redmond, WA
    Posts
    300

    Default

    It shouldn't need to be plugged in to tune. Check that the battery isn't low.

  3. #3
    Join Date
    Sep 2013
    Location
    Los Angeles, near the Beverly Center.
    Posts
    4,413

    Default

    You shouldn't HOLD down the power button, just give it a touch, which will turn on the tuner. Also, DO NOT leave the amp cable plugged into the uke, that will kill the battery very quickly. As soon as the cable is plugged in, the preamp/tuner goes on standby and uses the battery. I actually had my luthier add an on/off switch to my ukes and bass ukes so I could turn off the battery and keep the cable plugged in.


    This is Michael Kohan in Los Angeles, Beverly West near the Beverly Center
    9 tenor cutaway ukes, 5 acoustic bass ukes, 11 solid body bass ukes, 9 mini electric bass guitars (Total: 34)

    • Donate to The Ukulele Kids Club, they provide ukuleles to children in hospital music therapy programs. www.theukc.org
    • Member The CC Strummers: YouTube: www.youtube.com/user/CCStrummers/video, Facebook: www.facebook.com/TheCCStrummers
    Last edited by kohanmike; 08-25-2019 at 10:43 AM.

  4. #4

    Default

    I’m starting to believe I have a defective tuner. Plucking the string only registers when I hold the button down. If I just touch it (the power button), the green light blinks and then...nothing. The battery seems fine.

  5. #5

    Default

    Hold the phone! I figured out what the issue was. It is not a “touch” type button that powers it, but an actual “click” type. That required me to get my finger nail in there. Seems to be working fine. I’m guessing this doesn’t go off on its own as it has a hard switch.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •