robinfowler
Well-known member
And there you have proved the thought. I could move the four tuners to the positions of your four bottom tuners and trim 2-4cm as you say. I also notice you have angled the tuners in slightly as you move up the head stock to ensure the strings do not catch on the tuners below. I was thinking to do this but had not seen it on any other Uke.
Was thinking to use some dowel to fill the bottom tuner holes - and I will be trimming off the top tuner holes.
I will give this a go and let you all know how it turns out.
Was thinking to use some dowel to fill the bottom tuner holes - and I will be trimming off the top tuner holes.
I will give this a go and let you all know how it turns out.