Neil_O
Well-known member
I've got more than a year's experience with ukulele and a lot more experience with guitar. I have new tenor that may have exposed one of my flaws. When I move to an Dm, (first position) I tend to push the G string to the edge of the fretboard, or off it sometimes. I looked at my nut and decided it may be aligned more towards the G side.
I know I need to work on holding the strings straight down against the fretboard so I'm not pulling everything sharp.
So I think this is a combination problem but I need advice on whether the nut alignment should be centered, or even slightly towards the A side. When I bend a string, I always bend UP, so that's where I might want some more room.
Thanks,
Neil in Oakland CA
I know I need to work on holding the strings straight down against the fretboard so I'm not pulling everything sharp.
So I think this is a combination problem but I need advice on whether the nut alignment should be centered, or even slightly towards the A side. When I bend a string, I always bend UP, so that's where I might want some more room.
Thanks,
Neil in Oakland CA