Results 1 to 9 of 9

Thread: Reduced: Great little hard case for vintage sops

  1. #1
    Join Date
    Jan 2010
    Location
    st. paul, MN
    Posts
    698

    Default Reduced: Great little hard case for vintage sops

    Fyi for the community:

    I just got notice that the price on these dropped to $25+
    It's a nice case, built like a tank (much heavier than most), BUT with a too-high neck rest for many sops.
    Perfect, however, for the slender neck of vintage sopranos (EDIT: OLDER Martins, etc) .

    Rockbag RC Standard Line Ukulele Hard Case Black - Soprano https://reverb.com/item/3620783-rock...m_medium=share
    Last edited by ukeinfused; 11-27-2019 at 05:35 AM.
    Tracie

    Island Koa Instruments, prototype sop, Peter Howlett #153
    Kamaka white label sop (Tiki added!)
    Weymann sop, 1918
    Martin O, 1960's
    Kiwaya KTS-7
    Anuenue Khaya I sop
    Lanikai SPS-S spruce top sop
    Sawchyn hog concert (semi-custom, Martin 0 copy)
    Kala Elite 1MHG tenor SN
    Guild baritone, 1960's (trumpet buttons added, LOL)

  2. #2
    Join Date
    Jan 2014
    Location
    Twin Cities, MN
    Posts
    106

    Default

    This is a great deal! Tracie, or anyone that owns one of these, are you aware if this case has a foam piece of protruding material that runs down the inside center of the case lid....or is it open? I am not partial to raised foam, as it tends to put pressure on the strings and bridge over time.

    ~Jodie

  3. #3
    Join Date
    Jan 2010
    Location
    st. paul, MN
    Posts
    698

    Default

    Quote Originally Posted by jksk8in View Post
    This is a great deal! Tracie, or anyone that owns one of these, are you aware if this case has a foam piece of protruding material that runs down the inside center of the case lid....or is it open? I am not partial to raised foam, as it tends to put pressure on the strings and bridge over time.

    ~Jodie
    Jodie,
    The Rockcase does have an area that is extra padding on the lid from the bridge to the bottom of the fretboard, like you're talking about.
    However, it's very soft.
    I think it actually helps protect the uke from knocking or jiggling against the top of the case.
    Tracie

    Island Koa Instruments, prototype sop, Peter Howlett #153
    Kamaka white label sop (Tiki added!)
    Weymann sop, 1918
    Martin O, 1960's
    Kiwaya KTS-7
    Anuenue Khaya I sop
    Lanikai SPS-S spruce top sop
    Sawchyn hog concert (semi-custom, Martin 0 copy)
    Kala Elite 1MHG tenor SN
    Guild baritone, 1960's (trumpet buttons added, LOL)

  4. #4
    Join Date
    Jan 2010
    Location
    st. paul, MN
    Posts
    698

    Default

    OK, here it is with my Weymann. My 1920's Martin fits just as well. EDIT: The 60's Martin is actually too deep for an easy fit.

    https://photos.app.goo.gl/XyXzs8EiDdStPx7S9

    Seller does themselves no favors with inadequate pics.
    It has three gigantic buckles and a lock. SO MUCH BETTER than the generic hard cases on Ebay for the similar price (but again, it doesn't fit all necks).

    Looking at it again just made me buy another at this great price. Don't tell my spouse, LOL.
    Last edited by ukeinfused; 11-22-2019 at 07:35 AM.
    Tracie

    Island Koa Instruments, prototype sop, Peter Howlett #153
    Kamaka white label sop (Tiki added!)
    Weymann sop, 1918
    Martin O, 1960's
    Kiwaya KTS-7
    Anuenue Khaya I sop
    Lanikai SPS-S spruce top sop
    Sawchyn hog concert (semi-custom, Martin 0 copy)
    Kala Elite 1MHG tenor SN
    Guild baritone, 1960's (trumpet buttons added, LOL)

  5. #5
    Join Date
    Jan 2014
    Location
    Twin Cities, MN
    Posts
    106

    Default

    Tracie-

    Thanks for posting pics! Padding in the lid doesn't look bad. I ordered one, which I think will fit one of my soprano's quite nicely.

    Cheers!
    ~Jodie
    Last edited by jksk8in; 11-19-2019 at 04:03 PM.

  6. #6
    Join Date
    Jan 2012
    Location
    Saskatchewan
    Posts
    45

    Default

    Would a Koaloha long neck soprano fit in this case??
    Pono AS Soprano,
    Pono RC (C) PC Concert, Kala KA-ACP-CTG Concert (Low G), Sawchyn Concert
    Kala K-BE Baritone. Recording King Resonator,
    Godin Multiuke Tenor,
    Goodtime Concert Ukulele Banjo
    Outdoor Carbon Tenor

    Life is good, but better with a uke.

  7. #7
    Join Date
    Jan 2010
    Location
    st. paul, MN
    Posts
    698

    Default

    Quote Originally Posted by colemole View Post
    Would a Koaloha long neck soprano fit in this case??
    I think not.
    In my experience the Crossrock 800 series and UkeCrazy cases are extra long, though it's hard to score a cheap one.

    I've also found some of the generic Chinese hard cases (black vinyl with red stitching) on Ebay to be oversized. Cheap but not as nice.
    Tracie

    Island Koa Instruments, prototype sop, Peter Howlett #153
    Kamaka white label sop (Tiki added!)
    Weymann sop, 1918
    Martin O, 1960's
    Kiwaya KTS-7
    Anuenue Khaya I sop
    Lanikai SPS-S spruce top sop
    Sawchyn hog concert (semi-custom, Martin 0 copy)
    Kala Elite 1MHG tenor SN
    Guild baritone, 1960's (trumpet buttons added, LOL)

  8. #8
    Join Date
    Jan 2010
    Location
    st. paul, MN
    Posts
    698

    Default

    Well, dang.
    Just got my second one of these. Not as happy.
    Neck rest is even slightly higher, and a little crooked.
    There must be some quality control issues.
    Too bad, as it's such a nice case otherwise.
    Closing this thread.
    Jodie, I hope yours has no probs...
    Tracie

    Island Koa Instruments, prototype sop, Peter Howlett #153
    Kamaka white label sop (Tiki added!)
    Weymann sop, 1918
    Martin O, 1960's
    Kiwaya KTS-7
    Anuenue Khaya I sop
    Lanikai SPS-S spruce top sop
    Sawchyn hog concert (semi-custom, Martin 0 copy)
    Kala Elite 1MHG tenor SN
    Guild baritone, 1960's (trumpet buttons added, LOL)

  9. #9
    Join Date
    Jan 2010
    Location
    st. paul, MN
    Posts
    698

    Default

    I was feeling guilty for recommending these after my second one showed issues (above).

    I'm opening the thread back up to say that the the seller was more than gracious about giving me my money back.
    (Just in "case" that anyone received a dud where neck rest is too high to be useful.)

    They didn"t even require a return. Which is good, because they sent the case double boxed in an ENORMOUS box that I think must have cost my whole purchase price to ship out!

    To avoid the landfill, I'm thinking about taking the case apart to see if it can be adjusted somehow.
    Neck rest and storage box appear to be connected, but there are screws on the side that might allow the unit to come out...

    I'll close the thread again.
    Last edited by ukeinfused; 11-27-2019 at 05:33 AM.
    Tracie

    Island Koa Instruments, prototype sop, Peter Howlett #153
    Kamaka white label sop (Tiki added!)
    Weymann sop, 1918
    Martin O, 1960's
    Kiwaya KTS-7
    Anuenue Khaya I sop
    Lanikai SPS-S spruce top sop
    Sawchyn hog concert (semi-custom, Martin 0 copy)
    Kala Elite 1MHG tenor SN
    Guild baritone, 1960's (trumpet buttons added, LOL)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •